HR9-6 BB Battery 6V8AH for Telecommunications facilities, Alternative energy systems, Power supply networks and the energy industry, Street lighting and traffic signals, Electric vehicles
The HR9-6 is a 6 V valve-regulated lead-acid battery from the B.B. Battery HR high rate series. It is designed to support high-rate discharge, so it performs well where power must be delivered quickly. Nominal capacity is 8 Ah at the 10-hour rate, and the 15-minute rate rated power is 36 W per cell, with a weight of 1.4 kg. A standard T2 terminal type is fitted, and T1 is available as an optional terminal type. Absorbent glass mat (AGM) technology for efficient gas recombination supports internal gas handling, and the battery is maintenance free (no water replenishment required) with no free acid (leak-proof battery) construction. It can be installed in multiple orientations (do not install inverted), and a flame arrestor fitted for safety protects the unit. Power density at the 5-15 minute discharge rate is 30% higher than the BP series. Typical uses include electric bicycles and scooters, golf carts, telecommunications facilities, alternative energy systems, power supply networks and the energy industry, street lighting and traffic signals, electric vehicles, data centers, wheelchairs and floor cleaning equipment.
Taobao store
WeChat procurement
Product Features
- Maintenance free (no water replenishment required)
- Designed to support high-rate discharge
- Can be installed in multiple orientations (do not install inverted)
- Absorbent glass mat (AGM) technology for efficient gas recombination
- Power density at the 5-15 minute discharge rate is 30% higher than the BP series
- Flame arrestor fitted for safety
- No free acid (leak-proof battery)
Application Scenarios
- Telecommunications facilities
- Alternative energy systems
- Power supply networks and the energy industry
- Street lighting and traffic signals
- Electric vehicles
- Data centers
- Wheelchairs
- Floor cleaning equipment
- Electric bicycles and scooters
- Golf carts
Product parameters
- Model:HR9-6
- Voltage:6 V
- Nominal Capacity(Ah) 10-hour rate:8
- Rated Power(W//cell) 15-minute rate:36 W/单体
- Weight(kg):1.4
- Standard Terminal Type:T2
- Optional Terminal Type:T1
Product details
HR9-6 is a B.B. Battery HR high rate valve-regulated lead-acid battery built in a single 6 V block. The case is molded from opaque impact-resistant ABS plastic, the lid is firmly joined to the container and the terminal area is sealed. Six holes in the lid are used to pour electrolyte during production, and once filling is complete the pressure relief valve, made of non-flammable material, is mounted on these filling ports.
Positive and negative plates are both coated with a specially formulated paste active material. The valve-regulated sealed design means the battery needs no water addition throughout its service life and keeps the no free acid (leak-proof battery) condition. The battery uses absorbent glass mat (AGM) technology for efficient gas recombination, which raises internal gas recombination efficiency. For installation, the battery supports horizontal or vertical mounting, with the inverted position the only arrangement that is not allowed.
HR9-6 is designed to support high-rate discharge and can deliver high specific output power in short discharge modes: power density at the 5-15 minute discharge rate is 30% higher than the BP series. The model has a nominal voltage of 6 V and a rated power of 36 W per cell when discharged over 15 minutes to 1.3 V per cell; at the 10-hour rate the rated capacity is 8 Ah. The battery weighs about 1.4 kg, comes with a standard T2 terminal type and can also be supplied with an optional T1 terminal type.
Under normal operating conditions the series offers an expected float service life of up to 10 years, meeting the Eurobat standard for long-life batteries, and it suits applications with backup times of up to about 60 minutes. HR9-6 serves electric bicycles and scooters, golf carts, telecommunications facilities, alternative energy systems, power supply networks and the energy industry, street lighting and traffic signals, electric vehicles, data centers, wheelchairs and floor cleaning equipment. It is maintenance free (no water replenishment required), can be installed in multiple orientations (do not install inverted) and includes a flame arrestor fitted for safety, which makes integration into compact equipment straightforward.