Product Features

  • Maintenance free (no water addition required)
  • Low self-discharge rate
  • Can be used in any orientation (inverted position not allowed)
  • Absorbent glass mat (AGM) technology for efficient gas recombination
  • Explosion-proof filter fitted
  • Flame arrestor fitted for safety
  • No free acid (leak-proof battery)

Application Scenarios

  • Emergency lighting and video surveillance systems
  • Access control systems
  • Medical equipment
  • Communication facilities
  • Alternative energy
  • Power grids and the power industry
  • Street lighting and traffic signals
  • Data processing centers
  • Uninterruptible power supply
  • Security systems

Product parameters

  • Model:BPL33-12StandardType
  • Voltage:12 V
  • Nominal Capacity(Ah) 20-hour rate:33
  • Nominal Capacity(Ah) 5-hour rate:28.05
  • Nominal Capacity(Ah) 30-minute rate:16.5
  • Weight(kg):11.5
  • Standard Terminal Type:B7

Product details

BPL33-12 Standard Type is a 12V valve-regulated lead-acid battery from the B.B. Battery BPL general purpose long life series. Its nominal capacity is 33Ah at the 20 hour rate, 28.05Ah at the 5 hour rate and 16.5Ah at the 30 minute rate, it weighs 11.5kg and B7 is the standard terminal type. The battery is maintenance free (no water addition required), so no water or electrolyte work is needed during normal service, and the no free acid (leak-proof battery) design means there is no free liquid that could leak into the enclosure. A low self-discharge rate helps the battery retain usable charge when it is stored between uses, and absorbent glass mat (AGM) technology for efficient gas recombination keeps the sealed case working as intended. It can be used in any orientation (inverted position not allowed), which gives more freedom when the battery is fitted into a cabinet or a compact housing. An explosion-proof filter fitted and a flame arrestor fitted for safety both lower the risk of fire or explosion if the battery is overloaded or develops an internal fault. The sealed case also keeps the battery clean in installations where dust or moisture is present. BPL33-12 Standard Type is used in uninterruptible power supply, security systems, emergency lighting and video surveillance systems, access control systems, medical equipment, communication facilities, alternative energy, power grids and the power industry, street lighting and traffic signals and data processing centers. In these roles it works as a standby supply that keeps equipment running when the main supply is interrupted, and the sealed, maintenance-free construction allows it to be installed close to the loads it supports. Because it needs no topping up, the model suits cabinets and enclosures that are difficult to reach for routine service.

Related products

link
Go to purchase
Telephone
13775032303
email
powercube@foxmail.com
wechat
wechat
Loading...