HRL40-12 (H Type)
HRL40-12 (H Type) valve-regulated sealed lead-acid battery, 12V 38Ah, high power density, specifically designed for high-rate discharge. Equipped with top-mounted terminals and impact-resistant ABS shell, supports horizontal and vertical installation, maintenance-free and leak-proof. Suitable for scenarios such as UPS, data centers, security systems, emergency lighting, and solar energy storage, with an expected service life of up to 12 years.
Taobao store
WeChat procurement
Product Features
- Maintenance free(no water topping-up required)
- No free acid(Non-spillable battery)
- The battery is designed for high rate usage
- Can be used in any orientation(excluding used inverted)
- Absorbent Glass Mat technology for efficient gas recombination
- The power density at 5 min-15min discharging rate is 30% higher than BP series
- Flame-arrestor is installed to ensure safety
Application Scenarios
- Uninterruptible power supplies
- Medical equipment
- Emergency lighting and video surveillance systems
- Access control and management systems
- Telecommunication facilities
- Data processing centres
- Alternative energy sources
- Electrical supply network and power industry
- Wheelchairs
- Floor cleaning equipment
Product parameters
- ModelHRL40-12 (H Type)
- Voltage12 V
- 10-hour Ah38
- Weight kg12.1
- Weight lbs26.68
- Standard terminal typeB7
- Standard terminal position-
- Optional terminal typeI2
- Optional terminal position-
- Length mm210
- Length inches8.27
- Width mm129
- Width inches5.08
- Height mm168
- Height inches6.61
- Thickness mmB7:179, I2:168
- Thickness inchesB7:7.05, I2:6.61
Product details
HRL40-12 (H Type) is a high-performance 12V integrated battery from the HRL series of valve-regulated sealed lead-acid batteries under the B.B. Battery brand. With its reliability and adaptability, this battery is widely regarded as an ideal power solution for numerous critical application scenarios. Its shell is made of sturdy, opaque impact-resistant ABS plastic, ensuring the battery's durability. The battery cover is firmly connected to the shell, and the terminal area is reliably sealed to effectively prevent leakage. The terminal design varies by specific model, providing flexibility for different installation requirements.The six holes on the battery cover are the channels for pouring electrolyte during the production process, after which dedicated pressure relief valves will be installed. These pressure relief valves, made of non-combustible materials, are the core of the battery's safety design. They can effectively control internal pressure, thus ensuring a high level of fire and explosion safety and providing users with greater peace of mind during use.
In terms of internal structure, the positive and negative plates of HRL40-12 are coated with specially formulated paste-like coatings. Combined with advanced absorbent glass fiber separator technology, efficient gas recombination is achieved, making the battery truly maintenance-free throughout its entire lifespan, eliminating the need for users to worry about water addition.Meanwhile, there is no free acid inside the battery, featuring a leak-proof design for higher safety. A key highlight of its design is the support for flexible installation methods; the battery can be safely installed in horizontal and vertical positions besides being inverted, providing great convenience for spatial planning inside the equipment.
The HRL series batteries, including HRL40-12, are specifically designed for high-rate discharge. It can provide extremely high specific output power in short-time discharge mode, making it very suitable for occasions with high instantaneous power requirements. Specifically, under the condition of 15 minutes to 1.3V per cell, its discharge power ranges widely from 132 to 5205 watts per battery.Regarding this specific model HRL40-12, its power density at a discharge rate of 5 to 15 minutes is approximately 30% higher than that of traditional BP series batteries, meaning it can deliver stronger power at the same volume or weight. In terms of capacity, its nominal capacity at a 10-hour rate is 38 Ah. The physical dimensions of the battery are 210 mm in length, 129 mm in width, and 168 mm in height, with a weight of approximately 12.1 kg. The compact design facilitates integration into various devices. Terminal types available include B7 standard terminals or optional I2 terminals, with slightly different total thicknesses corresponding to each type, allowing users to choose based on wiring requirements.
This battery has an expected service life of up to 12 years under normal operating conditions, meeting Eurobat standards for long-life batteries and providing long-term investment security for users. It is highly suitable as the core energy storage unit for medium to low power uninterruptible power supply (UPS) systems, especially recommended for applications with a maximum backup time of 60 minutes. Additionally, it serves as a reliable backup power source for data processing centers, power supply networks and the power industry, emergency lighting systems, video surveillance systems, access control and management systems, as well as various medical equipment. In the renewable energy sector, such as the energy storage part of solar and wind power generation systems, HRL40-12 can also play an important role.At the same time, it can also be used for power backup in scenarios such as oil and gas extraction, rural estates, hotels, and shops, and can even serve as an auxiliary power source for electric vehicles. In conclusion, the HRL40-12 (H Type) battery, with its high safety, long lifespan, high power output, and flexible installation features, has become a wise choice for numerous industrial and commercial applications requiring stable and reliable backup power support.
.png)
